2023 Yeti ARC Inventory

A down country dream bike.

The Yeti ARC is back for 2023! The ARC is still dominating the downcountry category so you can get the most out of the trails. The new 130mm fork fulfills all of your short travel dreams. It's better for climbing since the suspension won't take too much of your pedaling power when you're going uphill.

The steeper seat tube angle compliments the longer reach. This combo gives you a more balanced seated pedaling position, and therefore more pedaling efficiency. Boost spacing makes the fork, frame, and wheels stiffer and stronger, in turn making the bike more predictable.

The raised chainstay guard to prevent excess chain slap noise. The universal derailleur hanger also protects the derailleur against chain jams. You can buy a replacement at almost any bike shop. Other Internal cable routing prevents any rattling or rub sounds on your rides.

Fit two water bottles in the frame to stay hydrated all day. Other features include an integrated headset and ISCG 05 tabs. Finally, the frame comes in a new Cobalt blue color in addition to the existing Rhino and Turquoise colors. MSRP ranges from $4,200 to $9,600.

Key Details

  • Travel

    130mm

  • Wheel Size

    29"

  • 2023 Yeti ARC in Turqoise
  • 2023 Yeti ARC in Rhino
  • 2023 Yeti ARC in Cobalt

Specifications

2023 Yeti ARC

BUILD KIT C1 C2 C3 T1 T3 T4
MSRP $4,200 $4,600 $5,500 $6,200 (FRAME ONLY: $2,100) $7,600 (FRAME ONLY: $2,100) $9,600 (FRAME ONLY: $2,100)
FORK FORK PERFORMANCE 34/130MM FORK PERFORMANCE 34/130MM FORK PERFORMANCE 34/130MM FOX FACTORY 34 FIT4/130MM FOX FACTORY 34 FIT4/130MM FOX FACTORY 34 FIT4/130MM
TIRE (F) MAXXIS MINION DHF 2.6 EXO MAXXIS MINION DHF 2.6 EXO MAXXIS MINION DHF 2.6 EXO MAXXIS MINION DHF 2.6 EXO MAXXIS MINION DHF 2.6 EXO MAXXIS MINION DHF 2.6 EXO
TIRE (R) MAXXIS REKON 2.6 EXO MAXXIS REKON 2.6 EXO MAXXIS REKON 2.6 EXO MAXXIS REKON 2.6 EXO MAXXIS REKON 2.6 EXO MAXXIS REKON 2.6 EXO
ROTOR (F) SHIMANO 180 SRAM CENTERLINE 180 SRAM CENTERLINE 180 SRAM CENTERLINE 180 SRAM CENTERLINE 180 SRAM CENTERLINE 180
ROTOR (R) SHIMANO 180 SRAM CENTERLINE 180 SRAM CENTERLINE 180 SRAM CENTERLINE 180 SRAM CENTERLINE 180 SRAM CENTERLINE 180
HEADSET CANE CREEK 40 INTEGRATED CANE CREEK 40 INTEGRATED CANE CREEK 40 INTEGRATED CANE CREEK 40 INTEGRATED CANE CREEK 40 INTEGRATED CANE CREEK 110 INTEGRATED
WHEELSET CRANK BROTHERS SYSTHESIS ENDURO 30MM CRANK BROTHERS SYSTHESIS ENDURO 30MM CRANK BROTHERS SYSTHESIS ENDURO 30MM DT SWISS XM1700 30MM DT SWISS XM1700 30MM DT SWISS XM1700 30MM
BB SHIMANO XT BB92 SRAM DUB BB92 SRAM DUB BB92 SRAM DUB BB92 SRAM DUB BB92 SRAM DUB BB92
GRIPS ODI ELITE PRO ODI ELITE PRO ODI ELITE PRO ODI ELITE PRO ODI ELITE PRO ODI ELITE PRO
BAR BURGTEC RIDE WIDE ALLOY ENDURO 35X760MM BURGTEC RIDE WIDE ALLOY ENDURO 35X760MM BURGTEC RIDE WIDE ALLOY ENDURO 35X760MM YETI CARBON 35X760MM YETI CARBON 35X760MM YETI CARBON 35X760MM
STEM BURGTEC ENDURO MK3 35X50MM BURGTEC ENDURO MK3 35X50MM BURGTEC ENDURO MK3 35X50MM BURGTEC ENDURO MK3 35X50MM BURGTEC ENDURO MK3 35X50MM BURGTEC ENDURO MK3 CNC 35X50MM
CRANK SHIMANO SLX 32T 170MM SRAM GX EAGLE 32T 170MM SRAM GX EAGLE 32T 170MM SRAM X1 EAGLE 32T 170MM SRAM X1 EAGLE 32T 170MM SRAM XX1 EAGLE 32T 170MM
SEAT SILVERADO CUSTOM SILVERADO CUSTOM SILVERADO CUSTOM SILVERADO CUSTOM SILVERADO CUSTOM ERGON SM ENDURO SADDLE
BRAKES SHIMANO SLX 2 PISTON SRAM LEVEL TL SRAM LEVEL TL SRAM LEVEL TLM SRAM LEVEL TLM SRAM LEVEL ULTIMATE
DERAILLER SHIMANO SLX SRAM GX EAGLE SRAM GX EAGLE AXS SRAM X01 EAGLE SRAM XX1 EAGLE AXS SRAM XX1 EAGLE AXS
CASSETTE SHIMANO SLX 10-51 SRAM GX EAGLE 1275 10-52 SRAM GX EAGLE 1275 10-52 SRAM GX EAGLE 1275 10-52 SRAM X01 EAGLE 1295 10-52 SRAM XX1 EAGLE 1299 10-52
CHAIN SHIMANO SLX SRAM GX EAGLE SRAM GX EAGLE SRAM GX EAGLE SRAM GX EAGLE SRAM XX1 EAGLE
SHIFTER SHIMANO XT SRAM GX EAGLE SRAM EAGLE AXS SRAM GX EAGLE SRAM EAGLE AXS SRAM EAGLE AXS
POST ONEUP DROPPER POST 31.6MM SM: 180MM, MD-XL: 210MM ONEUP DROPPER POST 31.6MM SM: 180MM, MD-XL: 210MM ONEUP DROPPER POST 31.6MM SM: 180MM, MD-XL: 210MM FOX TRANSFER 31.6MM / SM: 175MM, MD-XL: 200MM FOX TRANSFER 31.6MM / SM: 175MM, MD-XL: 200MM FOX TRANSFER FACTORY 31.6MM / SM: 175MM, MD-XL: 200MM
UPGRADES FACTORY SUSPENSION FACTORY SUSPENSION FACTORY SUSPENSION DT SWISS EXC 1501 30MM CARBON DT SWISS EXC 1501 30MM CARBON DT SWISS EXC 1501 30MM CARBON

Details

1 / 5

Switch Infinity

The translating pivot switches directions as the bike moves. Providing a a tailored anti-squat curve and independently-tuned leverage ratio.

Geometry

2023 Yeti ARC

SIZE S M L XL
SEAT TUBE LENGTH 380 410 450 495
EFF. TOP TUBE LENGTH 577.4 604.3 626 653.4
HEAD TUBE ANGLE 67 67 67 67
EFF. SEAT TUBE ANGLE 76 76 76 76
CHAINSTAY LENGTH 433 433 433 433
WHEELBASE 1143.5 1171.5 1194.2 1223.1
ESTIMATED BB HEIGHT 310 310 310 310
STANDOVER 723 722 720 720
HEAD TUBE LENGTH 95 102.9 109.6 119.6
FORK (AXLE TO CROWN) 543.7 543.7 543.7 543.7
FORK (OFFSET) 44 44 44 44
STACK 631.7 638.9 645.1 654.3
REACH 420 445 465 490
FRONT CENTER 710.5 738.5 761.2 790.1
VERTICAL FORK TRAVEL 119.7 119.7 119.7 119.7
Bike Geometry Chart
2023 Yeti ARC Inventory

Frequently Asked Questions

2023 Yeti ARC

  • Does this bike have ISCG mounts?

    Yes, an integrated 2-bolt ISCG '05 mount. It works best with low-profile modern guides. Some older models with larger upper guides might not fit. You should always do a fit-check with a specific chainguide to see what works.

  • What travel fork is this bike made to use?

    130mm fork. You can run a 150mm fork. It will slacken the head and seat tube angles and raise the bottom bracket. You can also run a shorter fork. It will steepen the head and seat tube angles and lower the bottom bracket.

  • What size tires can I fit on this bike?

    Up to 2.6" tires. It has great tire clearance, but sizes vary by manufacturers. So there's no number that works for all brands.

  • What size rotor fits on the frame?

    180mm with a brake adaptor, 160mm without.

  • What cranks and bottom bracket can I use?

    PF92 (92mm) bottom bracket and only wide "q" factor cranks. This bike readily works with Shimano, SRAM, and RaceFace cranks. You have to do a fit check for other brands.

  • What rear wheel axle fits on this bike?

    SRAM's Universal Derailleur Hanger at 12x148mm spacing. This axle only works with frames made with the Universal Derailleur Hanger.

  • What type of headset does this bike use?

    Integrated 41mm/52mm tapered headset. The bearings are contained in the head tube for a lower ride height, more stiffness, and easier installation.

  • Can I use an angleset on this bike?

    It's made with an integrated headset with the cups molded into the frame. You can easily drop the bearings into the cups.

  • Can I run a stealth seatpost on this bike?

    Yes, it has routing options for stealth only.

  • What chainline was this bike made around?

    55mm chainline. You can run others depending on the crank and chainring configuration, but you have to do a clearance check first.

  • What's the largest single-chainring I can use?

    It depends on the crank chainline and the chainring shape. Shimano/SRAM 55 chainline Boost cranks: 34t round/32t oval. Minimum chainring size: 28t round/30t oval. For more information, ask your local dealer or call Yeti at (303) 278-6909.

  • What size seat post does this bike use?

    31.6mm seat post.

  • What size seat collar does this bike use?

    36.4mm seat collar.

  • What's the longest travel dropper post I can run on this bike?

    It depends on your inseam. You can run any travel as long as you're above the minimum insert mark, your tires don't rub on your saddle, and your dropper doesn't bottom out in the frame. low your tire rubs on your saddle. Yeti runs 125mm drop on XS/SM frames, 150mm drop on MD, and 175mm drop on LG/XL.

  • Can I make this a mullet bike with a 27.5" rear wheel?

    It's possible but not recommended. It would slacken the head tube angle and seat tube angle and lower the BB too much. If those changes suit your ride style, then go for it.

  • Can I replace or modify any Yeti frame parts?

    You should replace them with genuine Yeti parts. Yeti can't qualify and ensure other products are safe to use on its frames. If you use parts from other brands, all warranties will be voided, and you assume full liability.

  • Can I change or upgrade any Yeti frame parts?

    Some parts from Fox, Shimano, SRAM and other brands are standardized. Check with a mechanic to make sure your parts are the correct standard. And ensure that they are correctly and securely mounted to the bike without any interference.

  • Can I fit a water bottle in the front triangle?

    Yes, it fits a standard-sized water bottle in the front triangle with a piggy-back shock. Use a side-entry cage for easy access.

  • What's the warranty on the this bike?

    Lifetime Manufacturer's Warranty.