Disc brakes are a necessity for modern mountain biking. They stop you on a dime, work in any weather, and leave enough room for you to use wider tires. But they can also be really noisy. If you hear squeaking or any other weird sound, something’s wrong, and you must fix it.

Check for Worn-Out Brake Pads

Brake pads wear out just like shoes. Check them every few rides, depending on usage. If they look thin, it’s time for a new set. You should be able to see them through the caliper, or you can take the wheel off to get a good look. New pads give you happy, efficient, and quiet brakes.

Clean Dirty Brake Pads (most common)

The pads will squeak if covered in oil, grim, or lube. Keep them clean, work well, and stay quiet. Be careful when washing your bike and oiling your chain because you don’t want accidental splashes. Use a brake-specific cleaner or rubbing alcohol to make them look new or to remove contaminants.

Use the Right Pads

Organic pads are usually quieter than metal ones. However, metal pads are cheaper and last longer. Make sure you’re using the right type of pads for your budget and riding style.

Break in New Brakes

It takes time for new brakes to get comfortable. Think of it like breaking into new shoes. Use them gently when you first install them. Ride at a walking pace, applying the brakes until you almost come to a stop. Repeat this 20 times or so, and they’ll be ready to go. This is called “setting” the pads and rotors.

Align the Brakes

Parts of the brakes might be rubbing together when they shouldn’t be. To fix this, all it takes is a quick realignment. Loosen the caliper bolts, squeeze the brake lever, and retighten the bolts evenly.

Tighten Everything Up

Loose parts can rattle. Make sure all of the bolts are tight. Avoid overtightening and damaging your bike or brakes. Use a torque wrench if you have one.

Straighten a Bent Rotor

One of the rotors could be bent, meaning you have to either bend it back or replace the rotor. To bend the rotor back into position, wear gloves, remove the wheel, rest it on the ground, and gently use your hands to try bending it into place. If this doesn’t work, you will need to replace the rotor. Identifying a bent rotor is as easy as easy as spinning the wheel and watching the rotor spin while looking for augmentation.

Check Your Bike Frame

Sometimes, but rarely, the problem isn’t with the brakes but the bike frame. The brake caliper mounts might not be perfectly aligned, causing the caliper to tighten misaligned. Try loosening the bolts, squeezing the brake lever while spinning the wheel to recenter the caliper, and then retightening them. If doing this doesn’t result in better results, it’s time to take your bike to the shop for measurements.

Bike Service at Airpark Bike Co

Most disc brake problems are fixable at home. If you need professional help, come see us at Airpark Bike Co. We can fix or replace brakes on the spot (most of the time).

Tags